TRUMPET / CORNET

D'S T-SLIDE KNOCKEROUTER

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools u...

Local Springfield, Missouri technician, Duane Lewis,designed and manufactures these handy tools used for removing slightly stucktuning slides. The seven different sizes are shaped and contoured to coverpractically all tuning slides from trumpet and cornet on up to sousaphone.Simple to use - place contoured end against inner surface of slide crook andlightly tap with mallet. Made from solid oak with cushioned end to protect against damage to the crook.Set contains 7 different sizes.

STRAIGHT BURNISHER - 8"

Premium Grade Tool Steel Highly Polished Width: 7/8" (22.3mm) Standard 2" Length Tang

Premium Grade Tool Steel Highly Polished Width: 7/8" (22.3mm) Standard 2" Length Tang

DENT HAMMER - LIGHT / MEDIUM DUTY - NARROW

Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn...

Our new #2129 model hammer works well on small and medium bore instruments: trumpets, french horn, etc. While both faces of the head have the same 3/4" (19mm) radius profile as the #2125 model hammer, we have 'sliced' of the sides of the faces to bring the face width down to 0.5" (13mm to allow access in tight areas..The hammer head is precision machined from non-corrosive, rust free, 303 stainless steel and polished to a fine finish. The hammer shaft is machined from 6066 T6 aluminum and fit...

PARTS CADDY

This wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. o...

This wood parts caddy keeps trumpet, cornet and french horn slides, pistons, caps, springs etc. organized and safe. Sturdy, solid construction made from solid oak. Handy for make plays and cleaning jobs; works great for holding parts during lacquering process. Safe to put in the oven for baked on finishes.

BOBCAT MOUTHPIECE PULLER

The Bobcat Mouthpiece Puller has become the standard in the industry, used worldwide by repair te...

The Bobcat Mouthpiece Puller has become the standard in the industry, used worldwide by repair technicians, professional musicians, and educators. Works on all brass instruments. Easy, safe to use design takes just seconds to remove even severely stuck mouthpieces.Sturdy construction, compact design, and no loose parts or attachments to keep track of.

SMALL CROOK DENT ROD - STRAIGHT

Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive ...

Great for small and medium bore brass instrument slide crooks.Precision built from non-corrosive stainless steel.Thread size: 1/4-20.Approximate overall length: 9-1/2" (24cm).Shaft diameter: 3/8" (9.5mm) tapering down to 1/4" (6.4mm).See our #2759 DENT ROD CLAMP or #2292 UNIVERSAL VISE JAWS for easy, secure mounting in a vise.Works well with our #2475 FLAT SIDE DENT BALL SET OF 30 or any dent ball with 1/4-20 thread size.

TRUMPET BELL STEM MANDREL

Precision machined from rust free stainless steel our #2280 Trumpet Bell Stem Mandrel is designed...

Precision machined from rust free stainless steel our #2280 Trumpet Bell Stem Mandrel is designed to provide good coverage for working out dents along the bell pipe between the tuning slide to bell brace and the bell crook.Dimensions: Overall Length: 24" (61cm) Working Length: 12" (30.5cm) Diameter: Overall Diameter: 1.25" (32mm) Working Length (approximate): 0.5" to 1" (12.7mm to 25.4mm)

ROLLER CONE 2" x 4" (51mm x 102mm)

Made from high density thermoplastic this cone is precision machined and polished with full radiu...

Made from high density thermoplastic this cone is precision machined and polished with full radiused end. Mounting stem is made from rust free stainless steel. Designed for bell flares on trumpet, cornet, and other small bore instruments. Diameter: 2" tapering to 0.5" (52mm - 13mm) Length (not including mounting stem): 4" (102mm) Note: this item requires #2251N Bearing Module for operation.See all Modular Roller Dent Roller System Components About our Modular Dent Roller System