Welcome to Votaw Tool Company!

Dent Ball Puller Cable

More Views

DENT BALL PULLER CABLE - LONG

Item #2059

Availability: In stock

$25.00 Each
OR

Quick Overview

Description

Our #2059 Dent Ball Puller Cable is designed with sufficient length for pulling dent balls through trombone handslides for dent removal in the crook area. Note that although this works well for roughing out badly dented crooks, removing dents in this manner (without unsoldering the crook) provides limited success because the joint between crook and slide tube restricts size of dent ball.

Cable is made from aircraft quality stranded 302/304 stainless steel to provide good strength and flexibility. Cable ends are fitted with threaded brass ferrule at one end and solid brass stopper ferrule at other end. Dent balls slide over threaded ferrule and a retaining nut threads onto ferrule. Run cable through handslide until dent ball is up to dent and secure cable in standard bench vise. Pull on handslide to drive ball past dent or to work dent out with hammer. Dent balls need minimum hole size 0.171" (4.3mm).

Specifications:
  • cable length: 64" (1.62m)
  • cable diameter: 0.093" (2.4mm)

Specification

SKU 2059
Variant 1
Sold by Each

Tags

Use spaces to separate tags. Use single quotes (') for phrases.