Welcome to Votaw Tool Company!

SOLDER-IN SLIDE PLUGS

Item #2429 - 2434

Availability: In stock

Product Name Price Qty
SOLDER-IN SLIDE PLUGS-SET OF 5 (2429)
$68.00 Set
SOLDER-IN SLIDE PLUG .500 X 2" (2430)
$12.00 Each
SOLDER-IN SLIDE PLUG .500 X 4" (2431)
$12.00 Each
SOLDER-IN SLIDE PLUG .625 X 4" (2432)
$13.00 Each
SOLDER-IN SLIDE PLUG .750 X 4" (2433)
$14.00 Each
SOLDER-IN SLIDE PLUG 1.0" X 4" (2434)
$17.00 Each
OR

Description

ABOUT OUR SOLDER-IN SLIDE PLUGS

All too often it seems easier to try various 'short cut' methods of removing frozen slides rather than proceeding to what many times has to be done in the long run; that is, unsoldering the crook and soldering a plug into the stuck slide. The plug can then be either grasped with a pair of vise grips or clamped in a vise to work the pipe out.

It has been the experience in our shop that if a slide does not come out with a minimum of effort (see our #2440 T-Slide Knockerouter or #2446 Slide Knocker) we are much further ahead proceeding with this method, which in most cases should only take about 10-15 minutes shop time with a minimum of tools.

Our Solder-in Slide Plugs are machined from solid brass rod (brass allows for good solder flow and adhesion) and are tapered to fit a wide range of slide sizes. The tapered portion of the plug has been drilled out, allowing for less mass and thus a shorter heat up time.

Offered in five different sizes to cover the wide range of slide pipe diameters. The #2430 is designed specifically for a trumpet main tuning slide (mouth pipe side), due to the minimal distance between the bell rim and the slide receiver.

Specification

SKU 2429 - 2434
Variant N/A
Sold by Each

Tags

Use spaces to separate tags. Use single quotes (') for phrases.