Welcome to Votaw Tool Company!


Item #3215

Availability: In stock

$9.99 Each

Quick Overview


SLOW-CURETM 30 Minute Epoxy is a professional grade adhesive that cures to a higher strength than our 5 minute epoxy. Bonded items can be handled after 8 hours. Full strength is reached in 24 hours.

Squeeze out equal length beads of resin and hardener, then mix together thoroughly with a popsicle stick or scrap piece of material. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Working and clamping time is 30 minutes. Note: mixing large quantities will reduce mixing time to less than 10 minutes.

Use in temperature range from 40°F-90°F (5°C-32°C). If stored in cool location, the epoxies can be heated in a microwave oven for about 10 seconds so that they flow easier. The heating process, with the caps off, also releases any moisture that can be absorbed by epoxies. Their shelf life, therefore, is virtually unlimited. Acetone works as the best solvent for cleaning epoxy from brushes and unwanted surfaces before it cures. If epoxy gets on surfaces that acetone will attack, use isopropyl alcohol.

Sold in 2 part formula:

  • 4 1/2 oz (128 g ) Hardener Squeeze Bottle
  • 4 1/2 oz (128 g ) Resin Squeeze Bottle

Material Safety Data Sheet . . . Note: Adobe Acrobat Reader® required to view or print this file.


SKU 3215
Variant N/A
Sold by Each


Use spaces to separate tags. Use single quotes (') for phrases.